Maytag Washer Error Codes List

Maytag Washer Troubleshooting Codes

Common Maytag Washer Error Codes and Fixes

by | Dec 30, 2024 | Washer Repair

Maytag washer error codes appear on your appliance when the diagnostic system deems something wrong with your washing machine. In most cases, error codes can be easily removed, but in some instances, one or more of the internal components will need to be repaired or replaced to fix the underlying cause of the code.

In this guide, we will go through all the major Maytag washer error codes and give you instructions on how to fix them. Hopefully, by following our advice, you can quickly start using your washing machine again.

 

Maytag Front Loader and Top Loader Models Covered:

A101, A102, A102S, A103, A103S, A104, LAT9416AAE, MAH3000AWW, MAH4000AWW, MAH5500BWW, MAH8700AWW, MAV6200AWW, MAV7600AWW, MHWE200XW00, MVWC300VW1, MVWC415EW2, MVWC6ESWW1, MVWX655DW1, PAV2200AWW, PAV2300AWW, PAVT234AWW.

Washing Machine

Table List of Maytag Washer Error Codes 

Understanding and interpreting error codes on your Maytag washer can be crucial in diagnosing and fixing problems promptly. Error codes can help pinpoint the issue, saving you time and preventing further damage to your appliance. Below are the most frequently encountered error codes on Maytag washers, along details on how to read them, explanations of what might cause these issues, and how to address them:

Error Code Meaning Possible Solution
LOC, LC Control Lock activated Press the Control Lock button
dET Detergent cartridge not detected Ensure the cartridge is inserted correctly
INT Cycle interrupted Press the Pause or Cancel button twice, then Power button
rL, F34 Items detected during a Clean Washer cycle Remove items and restart the cycle
Sud or Sd Excessive suds Manually remove excess suds and ensure correct detergent usage
F5 E2 Door not locking properly Check for obstructions and ensure door is closed properly
F7 E1 Motor speed sensing error Check for shipping bolts and ensure proper load distribution
F8 E1, LO FL Low water flow Ensure water faucets are turned on and no kinks in hoses
F8 E2 Dispenser system issue Check for clogging or residue in detergent drawer
F9 E1 Excessive drain time Ensure drain hose is not blocked and properly installed
Drn Draining issue Ensure proper hose installation
HC Hot and cold hoses reversed Swap hoses to correct installation
LdL Lid cannot lock Check for obstructions
LdU Lid cannot unlock Remove items on top of lid
LF, Lo FL, F8 E1 Fill cycle takes too long Ensure active water supply and check inlet valve filters
Lid Lid left open Close the lid
Ofb Unbalanced load Redistribute laundry evenly
OL Overloaded washer Remove several items from the drum
PF Power failure Hold Start or Power button for ten seconds
Sud Excessive suds Manually drain washer and ensure correct detergent usage

How to Read Maytag Washer Error Codes

1. Check the Display Panel:

  • Error codes appear on the display panel of your Maytag washer, usually as a combination of letters and numbers.
  • The error code is often displayed when there’s an issue with the washing machine’s operation.

2. Locate the Owner’s Manual:

  • Consult your Maytag washer’s manual, which usually includes a section dedicated to troubleshooting error codes.
  • The manual will describe each error code, the probable causes, and possible solutions.

3. Power Cycle the Washer:

  • If you notice an error code, start by turning off the washer and unplugging it for about 30 seconds. This can reset the system.
  • The error code is often displayed when there’s an issue with the washing machine’s operation.

4. Perform a Diagnostic Check:

  • Some Maytag washers have a diagnostic mode where error codes can be checked directly. Consult your manual to enable this mode.
  • During this mode, the washer will run a series of tests and display the codes, which correspond to specific problems.

Error Codes in Maytag Top Load Washers

  • Drn: Draining issue. Ensure the washer hose installation is correct.
  • HC: Hot and cold inlet hoses installed in reverse. Swap the hoses so that each is connected to the correct inlet.
  • LdL: Lid cannot lock. Check for any obstructions preventing the lid from locking properly.
  • LF, Lo FL, F8 E1: Fill cycle takes too long. Ensure water supply is active and check inlet valve filters for blockages.

 

  • Lid: Lid left open. Close the lid to clear the code.
  • LdU: Lid cannot unlock. Remove items placed on top of the lid.
  • Ofb: Unbalanced load. Redistribute the load evenly.
  • OL: Oversized load. Remove several items and restart the cycle.
  • PF: Power failure. Hold the Start button or Power button (varies by model) for ten seconds to restart.
  • Sud: Excessive suds. Manually drain the washer and ensure you are using the correct detergent.

Error Codes in Maytag Front Load Washers

  • LOC or LC: Control Lock activated. Press the Control Lock button or check the Owner’s Manual for specific instructions on how to deactivate it.
  • dET: Detergent cartridge not detected. Ensure the cartridge is inserted correctly or ignore this message if you are using single-load doses of detergent.
  • INT: Cycle was paused or canceled. Press the Pause or Cancel button twice and then the Power button once. If the code persists, unplug the washer for one minute.
  • rL or F34: Items detected in the washer during the Clean Washer cycle. Remove items from the drum and restart the cycle.
  • Sud or Sd: Excessive suds. The washer will automatically pause the tumbling and add extra rinse water. Ensure you are using HE detergent and check the drain hose for clogs.
  • F5 E2: Door not locking properly. Check for obstructions or ensure the door is closing completely. Press the Pause or Cancel button twice and then the Power button once to clear the code.
  • F7 E1: Motor speed sensing error. Check for remaining shipping bolts and ensure the load is not overloaded. Press the Pause or Cancel button twice and then the Power button once.
  • F8 E1 or LO FL: Low water flow. Ensure faucets are turned on fully and that water inlet hoses are not kinked or clogged. Press the Pause or Cancel button twice and then the Power button once.
  • F8 E2: Dispenser system error. Verify that the detergent drawer or cartridge is not clogged. Press the Pause or Cancel button twice and then the Power button once.
  • F9 E1: Excessive drain time. Check the drain hose for kinks or clogs and ensure it is properly installed. Press the Pause or Cancel button twice and then the Power button once.

    When to Call a Professional

    If you’re unable to resolve the issue after following the troubleshooting steps above, it’s advisable to reach out to ARS Repairs. Our experienced technicians specialize in diagnosing and fixing problems with Maytag washers and can quickly determine the cause of any error code you encounter. Whether it’s a simple fix or a complex repair, our team is here to help.

    To schedule a repair or inquire about our services, contact ARS Repairs today.

    We’re ready to assist you with all your appliance repair needs, ensuring your Maytag washer is back to working efficiently in no time.

    Call Our Maytag Washer Repair Technicians Today!

    Call us Now

    Areas We Serve

    We proudly offer our Maytag washer repair services to customers across Florida. No matter where you are, reliable help is just a call away. Let us restore your washer to peak performance!

    Maytag Washer Models We Service

    Refrigerator Repair

    Our team is skilled in diagnosing and repairing a wide range of Maytag washer models, including:

    • Neptune: Advanced models known for innovative features but prone to control board errors and drum balance issues.
    • Atlantis: Durable washers that may face agitator or motor malfunctions.
    • Commercial Grade: Rugged machines that occasionally encounter water inlet or spin cycle issues.
    • Performa: Efficient designs requiring pump replacements or resolution of error codes like LD (long drain).
    • Bravos: High-capacity washers with common issues like unbalanced loads or F51 motor sensor errors.
    • Centennial: Reliable units that may experience drainage problems or lid lock malfunctions.
    • Maxima Front Loaders: High-efficiency models with error codes like F9 E1 (drainage) or E02 (water flow).
    • HE Top Loaders: Water-saving models that sometimes need suspension or leveling repairs.

    No matter the model or issue, we’re equipped to restore your Maytag washer to peak performance.

    FAQs on Maytag Washer Error Codes

    What are the error codes for a Maytag washer?

    See the comprehensive list above, covering both front-load and top-load washers.

    How to fix F5 E3 error code on front load washer Maytag?

    The F5 E3 code indicates an issue with the door latch or lock. Check for any obstructions and ensure the door is closing properly.

    How do I fix F5 E3 error code on top load washer?

    This code typically indicates a motor or control board issue. Check for any loose connections or damaged wires. If the problem persists, contact a professional technician.

    How do I clear the F5 error on my Maytag washer?

    Press the Pause or Cancel button twice and then the Power button once. If the code persists, unplug the washer for one minute.

    What does E2 and F2 mean on a Maytag washer?

    E2 and F2 codes indicate a water level sensor issue. Check the hose and connections to the sensor and ensure they are not blocked or damaged.

    How do I reset my washing machine error code?

    Refer to the reset methods above. A hard reset by unplugging the washer for one minute is usually effective.

    Why does my washing machine stop mid-cycle with no error code?

    This can happen due to power fluctuations, a malfunctioning control board, or water drainage problems.

    What are washing machine codes?

    Washing machine codes are error messages displayed on the appliance screen when a problem is detected.

    What is the most common problem with front load washers?

    The most common problem is drainage issues, often resulting in error codes like Sud or Sd, LO FL, or F8 E1.

    What does F6 E3 mean on a Maytag front load washer?

    This code typically refers to a temperature sensor issue. Check the sensor and wiring connections.

    Why is my Maytag washer blinking F5 E2?

    This indicates a door lock issue. Check for any items obstructing the door lock and ensure it is functioning correctly.

    How to fix FL code on Maytag washer?

    Check for obstructions in the door latch or verify the door is closing completely.

    If these steps don’t resolve the issue, contact ARS Repair Inc. for professional assistance in diagnosing and repairing your washing machine!

    Posts You May Find Helpful

    Licensed and Authorized

    Warranty on Parts & Labor

    100% Customer Satisfaction

    24/7 Emergency Service

    Call Our Maytag Washing Machine Repair Technicians!

    Call us Now